RDX L4-2.3L Turbo (2008)
6. Install the tension pins (C) and retainer springs (D). Make sure the tension pin does not contact the parking brake lever.
7. Install connecting rods A and B on the adjuster nut (E).
NOTE:
-
Clean the threaded portions of connecting rod A and the sliding surface of connecting rod B, then coat them with rubber grease.
-
Shorten connecting rod A by fully turning the adjuster nut.
8. Position the brake shoe adjuster assembly (F) on the parking brake shoes.
9. Install the lower return spring (A).
10. Install the upper return spring (B) and brake spring A.
