RDX L4-2.3L Turbo (2008)
2. Install the parking brake lever (C) and wave washer (D) on the pivot pin, and secure with a new U-clip (E).
-
Install the wave washer with its convex side facing out.
-
Pinch the U-clip securely to prevent the parking brake lever from coming out of the brake shoe.
3. Position the parking brake shoes (A), then hook the rod spring (B) on the strut (C) first with the spring end (D) pointing downward. Then hook the
rod spring to the parking brake shoe, and install the strut on the parking brake shoes.
4. Apply a thin coat of Molykote 44MA grease to the brake shoe ends and strut ends (A), the sliding surfaces of the parking brake shoe (B), and the
pivot of the parking brake lever (C) as shown. Wipe off any excess. Keep grease off the brake linings.
5. Connect the parking brake cable (A) to the parking brake lever (B). Apply silicone grease to the cable contact surface (C) on the backing plate.
