RDX L4-2.3L Turbo (2008)
8. Disconnect the parking brake cable (A) from the parking brake lever (B).
9. Disconnect the rod spring (A), and remove the strut (B).
10. Remove the parking brake shoes (C).
11. Remove the U-clip (A), wave washer (B), parking brake lever (C), and pivot pin (D) from the brake shoe (E).
Reassembly
1. Apply Molykote 44MA grease to the sliding surface of the pivot pin (A), and insert the pin into the rear brake shoe (B) from the outside.
