RDX AWD L4-2.3L Turbo (2010)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve C Replacement
A/T Clutch Pressure Control Solenoid Valve C Replacement
1. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
2. Remove the air cleaner See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair.
3. Remove the battery base See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Removal.
4. Disconnect the A/T clutch pressure control solenoid valve C connector.
5. Remove A/T clutch pressure control solenoid valve C.
6. Remove the ATF joint pipes (A), O-rings (B), ATF pipe (D), and gasket (E).
7. Clean the mounting surface and the fluid passage of the transmission housing.
8. Install the 8 x 53 mm ATF joint pipe (A) with the filter end into its mounting hole (B).