RL V6-3.7L (2009)
5. Reassemble the clutch in the reverse order of disassembly, and note these items:
-
Install the field coil with the wire side facing down, and align the boss on the field coil with the hole in the A/C compressor.
-
Clean the pulley and the A/C compressor sliding surfaces with contact cleaner or other non-petroleum solvent.
-
Install new snap rings, note the installation direction, and make sure they are fully seated in the groove.
-
Make sure that the pulley turns smoothly after it's reassembled.
-
Route and clamp the wires properly or they can be damaged by the pulley.