RL V6-3.7L (2009)
-
Roll the glass up and down to see if it moves freely without binding.
-
Make sure that there is no clearance between the glass and glass run channel when the glass is closed.
-
Adjust the position of the glass as necessary. See: Window Glass/Front Door Window Glass/Adjustments
-
Check for water leaks. See: Window Glass/Front Door Window Glass/Adjustments
-
Test-drive and check for wind noise and rattles.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to prevent water
leaks.
-
Make sure the power door locks, windows, and the power mirror operate properly.
-
Do the power window control unit reset procedure. See: Testing and Inspection/Programming and Relearning