RL V6-3474cc 3.5L (1998)
30. Using a cutter or an equivalent tool, cut and remove the five seal rings from the sleeve.
CAUTION: Be careful not to damage the edges of the sleeve grooves and outer surface when removing the seal rings.
31. Using a cutter or an equivalent tool, cut the valve seal ring and O-ring at the groove the pinion shaft. Remove the valve seal ring and O-ring.
CAUTION: Be careful not to damage the edges of the pinion shaft groove and outer surface when removing the valve seal ring and O-ring.
32. Remove the valve oil seal and backup ring ('96 - 98 models) or wave washer ('99 - 01 models) from the pinion shaft.
NOTE: