RSX L4-2.0L (2005)
Air Register: Service and Repair
Driver's Side Vent Panel
Driver's Side Vent Panel Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the dashboard and related parts.
1. Gently pry up on the driver's side vent panel (A) to detach the clips (B, C), then pull out and remove it.
2. If necessary, remove the screws securing the driver's side vent (A), then separate it from the panel (B).
3. Install the panel in the reverse order of removal, and note these items:
-
Replace any damaged or stress-whitened clips.
-
Push the clips into place securely.