acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Photo 76|Page 534
Page 2
background image

Replacement - Front Passenger's Side

7. Remove the four Torx bolts from the SRS unit, then pull the SRS unit out of the dashboard.

Replacement - Front Passenger's Side

8. Install the new SRS unit.
9. Connect the SRS main harness 18P connector to the SRS unit, then push it into position until it clicks.

10. Reinstall the radio panel bracket and radio panel assembly.
11. Reinstall the dashboard center trim and center console.
12. Reconnect the driver's airbag 2P connector to the cable reel 2P connector, and reinstall the access panel on the steering wheel.
13. Reconnect the front passenger's airbag connector to the SRS main harness, then reinstall the glove box.
14. Reconnect the battery positive cable, then the negative cable.
15. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator light should come on for about 

six seconds and then go off.

16. Enter the anti-theft code for the radio, then enter the customer's radio station presets.

Relays and Modules - Starting and Charging > < Photo 76|Page 534