TL V6-3.5L (2007)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Removal/Installation - Trunk Area
Trim Removal/Installation - Trunk Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the trim and panels.
1. Release the clip, then remove the spare tire lid (A).
2. If necessary, remove the trunk floor spacer (B).
3. Detach the clips and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove the panel.
4. Remove these items:
-
Rear seat-back
-
Rear seat cushion