TL V6-3.5L (2007)
8. Remove the locknut (A) and the fuel tank unit (B).
Installation
1. Install a new base gasket (A) on the fuel tank (B).
2. Insert the fuel tank unit (C) into the fuel tank. Be careful not to bend the fuel gauge sending unit.
3. Align the marks (D) on the fuel tank and the fuel tank unit, then tighten a new locknut (E) by hand.
NOTE:
-
After tightening, make sure the marks are aligned. Check circumference of the base gasket visually or by hand and be sure that the gasket is not
pinched.
-
Do not coat the base gasket with the engine oil.