TSX L4-2.4L (2005)
11. Install the seat belt in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers, collars, and bushings on the upper and lower anchor bolts as shown.
-
If the seat belt tensioner has been deployed, replace the front seat belt protector with a new one.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.
-
Reset the clock.
Seat Belt Buckle
1. Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the preset buttons.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Remove the front seat.
4. Manual seat: Remove the center cover.