TSX L4-2.4L (2005)
20. Remove the splash shield.
21. Attach the front subframe adapter to the front suspension subframe. Hang the hook of the front subframe adapter over the front of the subframe,
then tighten the front subframe adapter screw.
22. Raise the floor jack, lining up the slots in the arms of the subframe adapter with the bolt holes on the corners of the jack base. Bolt the jack to the
subframe adapter securely.
23. Remove the inlet line holder mounting bolt on the front suspension subframe.
24. Remove the inlet line holder mounting bolt and return hose from the gearbox mounting bracket.