100CS Quattro Wagon V6-2.8L (AAH) (1992)
Front Bumper: Service and Repair
Front Bumper Cover Assembly
Front bumper cover, assembly
CAUTION! When reinstalling bumper cover, use pop rivets with offset.
1 - Trim strip, right
‹› Remove after disassembling bumper -4-
‹› Drill and punch out rivets
2 - Pop-rivet
‹› With offset
3 - Trim strip, left
‹› Remove after disassembling bumper -4-
‹› Drill and punch out rivets
4 - Bumper
To remove:
-
Remove bumper assembly
-
Drill out rivets ~ Fig. 1
-
Remove bumper cover from bumper
5 - Bumper cover
‹› Remove bumper assembly for access
6 - Pop-rivet
‹› With offset