90 Quattro 20V (Canada) L5-2309cc 2.3L DOHC (7A) (1989)
Fuel Gauge: Testing and Inspection
Fuel gauge, checking
Audi 80/90, 80/90 Quattro
-
remove luggage compartment cover
-
remove connector from fuel gauge sender
-
connect VW 1301 to fuel gauge sender terminals 1 and 2
CAUTION! Be sure that connector terminals are not pushed back into sleeve during test or when reconnecting to fuel gauge sender.
-
switch ignition ON
-
adjust VW 1301 according to following:
-
wait at least two minutes before reading gauge
-
gauge must read to right edge of third red line in reserve area (arrow)
-
tap instrument cluster glass lightly with finger while reading gauge to assure needle movement is complete