90S Quattro (Canada) V6-2.8L (AAH) (1993)
Always replace
27. Tie rod end, left
Pressing off steering lever ~ Fig. 2 below
Note: When installing or adjusting the two tie rod ends (i.e. when adjusting toe), make sure that the joint pins are not tilting to the front or to the
rear.
28. Threaded piece
Always adjust toe on both tie rods
29. Adjusting screw
Fig. 1 Routing to steering gear
1. Return hose
2. Pressure hose
When connecting lines to steering gear, note specifications:
a. = approx. 30°
b. = approx. 5°
Fig. 2 Pressing off tie rod end