A1
| Removing and installing rear lid lock |
| 1 - | Cap for rear lid lock |
| q | Before removing rear lid trim, detach from rear lid lock. |
| q | Must engage audibly during installation |
| 2 - | Rear lid lock |
| q | Before removing, detach cover for rear lid lock. |
| q | Rear lid trim removed → Rep. gr.70 |
| q | Unplug electrical connector. |
| q | Unscrew nuts and detach rear lid lock. |
| q | Pull rear lid lock with clip out of centring hole. |
| 3 - | Nut |
| q | 21 Nm |
| 4 - | Cover |
| q | Press cover onto lock until clip engages audibly in rear lid lock. |
| 5 - | Wiring harness |
| 6 - | Rear lid |
