A1
|
|
1 - | Sliding/tilting sunroof |
2 - | Water drain hose (rear) |
– | To remove component, first pull it off at connection for sliding/tilting sunroof. |
– | Pull water drain hose out of hose retainers. |
– | Unfasten grommet from wheel housing and pull water drain hose downwards out of wheel housing. |
q | Water drain hoses (rear) -2- are routed along C-pillars and end in wheel housings (rear). |
Note
Use cleaning and insertion aid -VAS 6620- to clean water drain hoses. |
q | Clean from lower end of hose. |
q | To do so, you must first remove wheel housing liner (rear). |
q | After glass panel has been removed, water drain hoses can also be cleaned from top. |
3 - | Hose retainer |
q | Clip into C-pillar |
q | Press water drain hose into retainers. |
4 - | Grommet (rear) |