| Controlling and regulating components of air conditioner (not in passenger compartment) |
Note | t
| In the event of a fault in the air conditioner, start by interrogating the event recorder of the operating unit, Climatronic control unit -J255- / air conditioning system control unit -J301- in the
„Guided fault-finding“ function → Vehicle diagnostic tester. |
| t
| If no entry is displayed, read the measured values of the operating unit, Climatronic control unit -J255- / air conditioning system control unit -J301- and actuate any problematic component by way of
„Final control diagnosis“ in the
„Guided fault-finding“ function → Vehicle diagnostic tester. |
| t
| For air conditioner servicing work not requiring opening of the refrigerant circuit, refer to → Chapter. |
| t
| For air conditioner servicing work requiring opening of the refrigerant circuit, refer to → Chapter. |
| On completion of repair work, perform the following operations on the operating unit, Climatronic control unit -J255-/ air conditioning system control unit -J301- in the
„Guided fault-finding“ function → Vehicle diagnostic tester: |
| –
| Interrogate the event recorder and delete any entries displayed. |
| –
| Check the encoding - automatically controlled air conditioner only. |
| –
| Check the adaption if applicable - automatically controlled air conditioner only. |
| –
| Perform basic setting - automatically controlled air conditioner only. |
|
|
|
