–
| Remove the control motor for the fresh-air/air recirculation flap: Heater/manually controlled air conditioner → Chapter, automatically controlled air conditioner → Chapter. |
–
| Screw out the bolt -4-. |
–
| Unfasten the clips -2, 3-. |
–
| Detach the intake housing -1- to the front -arrow-. |
Install in reverse order, paying attention to the following: |
–
| Fit the control motor for the fresh-air/air recirculation flap: Heater/manually controlled air conditioner → Chapter, automatically controlled air conditioner → Chapter. |
|
|
|