Audi Workshop Service and Repair Manuals

The handbrake must be adjusted after charging/adjusting the service brake system. The service brake system must be fully functional.

The handbrake cables must not be under tension.

Resetting is only required after replacing the handbrake cables, the brake carrier or brake pads.

• ‒ Release handbrake.
• ‒ Remove the rear storage compartment.
• ‒ Firmly press brake pedal several times.
• ‒ Pull handbrake lever 4 notches.

• ‒ → Tighten adjusting nut -arrow- until both wheels are difficult to turn by hand.
• ‒ Release handbrake and check, whether both wheels can spin freely. If necessary, screw back adjusting nut slightly.

It is unnecessary to adjust the handbrake after readjustment owing to the automatic adjustment of the rear brake.