|
Electrical check on ABS/EDL/ASR/ESP ITT Mark 20 IE
Test table
Notes on test table
-
◆ Socket designations of adapters V.A.G 1598/33 are identical to contact designations of ABS with EDL control unit -J104 in current flow diagram.
=> Current Flow Diagrams, Electrical Fault-finding and Fitting Locations binder
-
◆ If measured values deviate from specifications, carry out fault rectification measures indicated on right of table.
=> Current Flow Diagrams, Electrical Fault-finding and Fitting Locations binder
-
◆ Use adapter set V.A.G 1594 A for checking continuity.
-
◆ If measured values only differ slightly from specifications, clean sockets and connectors of testers and measurement leads (with contact spray G 000 700 04) and repeat test. Before replacing respective components, check wiring and connections and also repeat resistance check on component, particularly if specifications stipulate a resistance of less than 10 ω.
|
