Audi Workshop Service and Repair Manuals > A2 > Vehicle electrics | Radio, Telephone and Navigation System, Self-diagnosis | Self diagnosis, V.A.G Inspection Service | Self-diagnosis of navigation system Nav IV (BNS 4.0) | Adaption | Disabling/enabling production diagnosis

Disabling/enabling production diagnosis - Adaption channel 03

Indicated on display:

–	Press keys 0 and 3 (“Channel 3”).

Note

An incorrect entry can be corrected after pressing C key.

–	Confirm entry by pressing Q key.

Adaption

Enter channel number XX

Indicated on display:

Channel selected and production diagnosis status (0 = disabled, 1 = enabled) are displayed on top line.

–	Press → key.

Channel 3     Adaption      0        ->

                          <-1 3->

Indicated on display:

–	Enter new adaption value (e.g. 00001).

00000 = Production diagnosis disabled

00001 = Production diagnosis enabled

–	Confirm entry by pressing Q key.

Channel 3     Adaption      0        ->

Enter adaption value XXXXX

Indicated on display:

–	Press → key.

Channel 3     Adaption      1        ->

                                 <-1 3->

Indicated on display:

–	Confirm entry by pressing Q key.

Channel 3     Adaption      1         Q

Store altered value?

Indicated on display:

–	Press → key.

Channel 3     Adaption      1        ->

Altered value stored

Indicated on display:

–	Press keys 0 and 6 (“End of output”).

–	Confirm entry by pressing Q key.

Rapid data transfer                HELP

Select function XX

Audi Workshop Service and Repair Manuals