A3 L4-2.0L Turbo (BPY) (2006)
Trunk / Liftgate Latch: Service and Repair
Rear Lid Lock, Removing And Installing
Assembly Overview
1
-
Lock actuator for rear lid.
-
Remove together with mounting plate - 3 -.
-
Removal.
2
-
Operating rod
-
To remove, swing out pivot lever - 8 - at rear lid lock - 6 - and disengage operating rod from rear lid lock.
-
When disassembling, remove actuator first.
3
-
Mounting plate
-
Remove with actuator.
-
Operating rod disengaged at lid lock.
-
Loosen bolts - 4 - and slide mounting plate with actuator out of elongated holes.
-
Remove actuator with mounting plate and operating rod out of rear lid.
4
-
Torx(TM) screw
-
1.7 Nm
-
Secures mounting plate to rear lid.
-
Only loosen bolts when disassembling.
5
-
Torx(TM) screw
-
Secures actuator to mounting plate.
-
1.7 Nm
6
-
Rear lid lock
-
Remove rear lid trim.
-
Removal
7
-
Latch cover
-
When assembling, cover must engage audibly into lid lock.
8
-
Hinge arm
-
To remove, pivot operating rod - 2 - 90 degrees and disengage operating rod.
9
-
Release element
-
Inserted sideways on lock lever.