A3 L4-2.0L Turbo (BPY) (2006)
/Page-6023004.png)
28 - Bolt
‹› 130 Nm plus an additional 90° turn
‹› Always replace
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ] See: Steering and
Suspension/Suspension/Service and Repair/Rear Axle in Curb Weight Position
29 - Tie Rod
‹› Closed in direction of travel
30 - Nut
‹› 90 Nm plus an additional 90° turn
‹› Always replace
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ] See: Steering and
Suspension/Suspension/Service and Repair/Rear Axle in Curb Weight Position
31 - Bolt
‹› Always replace
32 - Nut
‹› 50 Nm plus an additional 180° turn
‹› Always replace
33 - Crossmember
‹› Omitted with the steel subframe
34 - Bolt
‹› Always replace
