A3 L4-2.0L Turbo (BPY) (2006)
-
Remove hex nut - 3 -.
-
Remove hex bolt - 5 -.
-
Remove level control system sensor - 4 -.
Installing
Installation is in reverse order of removal. Note the following:
The hooks on the coupling rod must be guided onto the transverse link.
Sensor lever must point toward outside
Tightening Specifications, refer to:=> [ Subframe, Diagonal Brace, Stabilizer, Transverse Link, Bracket and Level Control System Sensor Assembly
Overview ] See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair/Removal and Replacement/Subframe, Diagonal Brace,
Stabilizer, Transverse Link, Bracket and Level Control System Sensor Assembly Overview
-
On vehicles with Audi Magnetic Ride, reprogram control position.
-
Perform headlamp basic setting. Refer to => [ Level Control System Sensor Overview ] See: Rear Suspension/Level Control System Sensor
Overview