A3 L4-2.0L Turbo (BPY) (2006)
-
Turn steering wheel into straight ahead position.
-
Guide new clamp and boot on to tie rod.
-
Twist tie rod far enough into tie rod end until dimension - a - is obtained.
Dimension - a - = 371 +/- 1 mm
-
Tighten lock nut by hand.
-
Rotate tie rod in steering rack and tighten. Refer to => [ Electromechanical Steering Gear Assembly Overview, Generation I ] See:
Electromechanical Steering Gear Assembly Overview, Generation I.
-
Slide boot - 2 - on to tie rod - 1 -. Pay attention to correct position when doing this.