A3 L4-2.0L Turbo (BPY) (2006)
Relay Lever with Clip - arrow 1 -
-
Remove the clip - arrow 1 - and the relay lever together with the cable retainer.
Continued for All
The cable retainer must be behind the tab - arrow 2 -.
‹› The cable retainer may only be removed with the relay lever removed. Refer to => [ Pry the Selector Cable Retainer Out of the
Plastic Relay Lever. ]
‹› To install, grease mounting points and contact surfaces with Grease (G 000 450 02).
-
Press the cable retainer on the relay lever. Refer to => [ Press on the Cable Retainer ]
-
Insert the relay lever and cable retainer all the way in.
Relay lever with tab - arrow 1 - (see previous illustration).
‹› The tab - arrow 1 - secures the relay lever (see previous illustration).
‹› Make sure it engages securely.
‹› The cable retainer must be behind the tab - arrow 2 - (see previous illustration).
Relay lever with clip - arrow 1 - (see previous illustration).
‹› The clip - arrow 1 - secures the relay lever.
‹› Make sure the clips locks securely.
‹› The cable retainer must be behind the tab - arrow 2 -.
Pry the Selector Cable Retainer Out of the Plastic Relay Lever.