| Installing front interior light -W1- with warning lamp for airbag deactivated on front passenger side |
Note | The wiring to the warning lamp for airbag deactivated on front passenger side -K145- (“PASSENGER AIRBAG OFF” lamp) is part of the front interior light -W1- wiring harness. |
| –
| Plug in connectors to front interior light -W1- and warning lamp for airbag deactivated on front passenger side -K145-. |
| –
| Install front interior light -W1- with warning lamp for airbag deactivated on front passenger side -K145-. |
WARNING | Make sure nobody is in the vehicle when the battery is being connected. |
|
| –
| Re-code airbag control unit -J234- → Chapter. |
| –
| Perform functional test. |
| –
| Deactivate airbag on front passenger side with key-operated switch to deactivate airbag on front passenger side -E224-. |
|
| Warning lamp for airbag deactivated on front passenger side -K145- must light up constantly. |
| –
| Activate airbag on front passenger side with key-operated switch to deactivate airbag on front passenger side -E224-. |
|
| Warning lamp for airbag deactivated on front passenger side -K145- must go out. |
| –
| Interrogate and erase fault memories of all control units. To do so, use a suitable vehicle diagnostic, testing and information system, e.g. vehicle diagnostic, testing and information system -VAS 5051B-. |
|
|
|
