audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Converting glove box > < Retrofitting key-operated switch (Audi A4 2001 ? from week 36/2004 onwards including Audi S4 and Audi S4 Cabriolet)

A3 Mk1

Removing glove box
Removing glove box
Special tools and workshop equipment required
   
t  Front-end hook -3370-
  W00-0509
1 - Glove box
t  Removing
–  Switch off ignition and remove ignition key.
–  With ignition switched off, disconnect earth wire at battery → Electrical system; Rep. Gr.27.
–  Remove dash panel end trim (right-side) -2- → Fig..
–  Open glove box lid.
–  Loosen the three bolts -3- at top in recesses of glove box -1-.
–  Working from the side, loosen bolts -5- (2x).
–  Working from footwell, loosen bolts -4- (2x) from underneath.
–  Take out glove box downwards.
  WARNING
Before unplugging the connectors, discharge static by briefly touching door striker plate for example.
–  Unplug connector of supply lead/wiring harness for glove box -6-.
2 - Dash panel end trim (right-side)
q   Removing → Fig.
3 - Bolts (3x)
q   Tightening torque: 5 Nm
4 - Bolts (2x)
q   Tightening torque: 5 Nm
5 - Bolts (2x)
q   Tightening torque: 5 Nm
6 - Connector
q   Of supply lead/wiring harness for glove box
7 - Dash panel

   
Removing dash panel end trim (right-side)
–  Pull off dash panel end trim (right-side) with front-end hook -3370- in direction of -arrow-.
  A96-0442

Converting glove box > < Retrofitting key-operated switch (Audi A4 2001 ? from week 36/2004 onwards including Audi S4 and Audi S4 Cabriolet)