audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Converting glove box > < Retrofitting key-operated switch (Audi A8 2003 ?)
Removing glove box
   
Removing glove box
Special tools and workshop equipment required
t  Removal wedge -3409-
t  Protective cap for wiring harness connector VAS 6223/9 from optical fibre repair set -VAS 6223-
t  Radio release tool -T10057-

  Caution
Contrary to the procedure described for “Disconnecting and connecting battery” → Electrical system; Rep. Gr.27, the battery must be disconnected with the ignition on when retrofitting the key-operated switch to deactivate airbag on front passenger side -E224- and the warning lamp for airbag deactivated on front passenger side -K145-.
–  Switch on ignition.
–  Disconnect earth wire at battery → Electrical system; Rep. Gr.27.
Removing CD changer -R41-
   
–  Insert 2 keys of radio release tool -T10057- into front of CD changer -R41-.
t  Top L - top left
t  Top R - top right
–  Pull CD changer -R41- out of mounting frame.
–  Unplug connectors at CD changer -R41-.
  A91-0893
–  Seal open wiring harness connector of optical fibre -2- with protective cap for wiring harness connector VAS 6223/9 -1-.
  Note
The protective cap for the wiring harness connector VAS 6223/9 prevents contamination of or mechanical damage to the end face of the optical fibre wiring harness connector, which would impair light transmission.
–  Pull radio release tool -T10057- out of CD changer -R41- by pressing catches on CD changer -R41-.
Removing storage compartment in glove box
  A97-0760
–  Use a small screwdriver to release retaining tabs -1- and -2- in direction of -arrow-.
–  Pull storage compartment out of glove box.
Removing glove box
  A68-0462
–  Use screwdriver to prise off dash panel end trim (right-side) -arrow-.
  A68-0301
–  Remove bolts -arrows-.
–  Remove bolts -1- and -2-.
  WARNING
Before unplugging the connectors, discharge static by briefly, e.g. by touching door striker plate.
  A68-0305
–  Unplug connector -1- from glove box wiring harness -2-.
3 - Glove box power supply lead
Vehicles with knee airbag
  A68-0313
–  Pull catch -2- in direction of -arrow- and unplug electrical connectors -1- and -3-.
All vehicles (continued)
–  Remove glove box.
  A69-0382

Converting glove box > < Retrofitting key-operated switch (Audi A8 2003 ?)