Audi Workshop Service and Repair Manuals

• Torx bolt
• ◆ 23 Nm
• Lock carrier
• ◆ Before removing, detach bumper trim

Note:

Lock carrier can be removed with headlights and radiator fitted.

• ◆ If radiator is also to be removed, drain coolant beforehand.
• ◆ Detach electrical connections for headlights.
• ◆ Turn-signal unit removed.
• ◆ Remove bonnet lock => Page 55-3

• ◆ To remove, unscrew bolts -1- and -4-.
• ◆ Bolts -arrows- are used to locate bumper on lock carrier and are not unscrewed.
• ◆ Remove lock carrier to front.

• Turn-signal indicator
• Hexagon bolt
• ◆ 35 Nm
• Torx bolt
• ◆ 6 Nm
• Bumper
• ◆ Removing => Page 63-1
• Bumper cover
• ◆ Removing => Page 63-1
• Self-tapping screw
• ◆ 7.5 Nm
• Noise insulation

Fig.1→     Removing and installing support for lock carrier

• ‒ Unscrew Torx bolt -arrow-.

• ‒ Unscrew lower bolts -arrows- at bonnet lock.
• ‒ → Unscrew bolts on bumper and remove support.