Audi Workshop Service and Repair Manuals > A3 Mk1 > Body | General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66) | Body front | Body, front | Removing and installing wing (S3)

Removing and installing additional reinforcement (except S3) > < Removing and installing tubular member (except S3)

General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)

Body, front

Removing and installing wing (S3)

A50-0606

Wings

◆ Removing

‒ Removing front wheel housing liner .
‒ Remove bumper cover -63-1.
‒ Remove guide piece -63-1.
‒ Remove sill cladding => Page 66-15.
‒ Remove bracket => Page 66-18.
‒ Remove locking piece => Page 50-10 Fig.1
‒ Remove Torx bolts -3- and -4-.
‒ Remove wing.

◆ Installing

Installation is in reverse order.



Blind rivet nut Torx bolt ◆ 10 Nm Torx bolt ◆ 8 Nm Snap nut Stamped nut Guide piece Bumper cover

A50-0607

→ Fig.1 Removing and installing locking piece

‒ Removing front wheel housing liner => Page 66-26.
‒ Unscrew bolts -3- and remove locking piece -1- from wheel housing.

2 - Expanding nut

Body
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66) / Body front / Body, front
Removing and installing wing (S3)

Removing and installing additional reinforcement (except S3) > < Removing and installing tubular member (except S3)