Audi Workshop Service and Repair Manuals

• Bracket

• ◆ Removing
• ‒ Remove sill cladding .
• ‒ Remove Torx bolts -5- and -7-.
• ‒ Remove Torx bolts -2-.
• ‒ Remove bracket.
• ◆ Installing

Note:

Position the bracket longitudinally above the fixing point on the wing.

• ‒ Position bracket and fit Torx bolts -5- and -7-.
• Do not tighten Torx bolts, the bracket must remain movable.

• ‒ Align bracket and tighten Torx bolts -5- and -7-.
• ‒ Install sill cladding => Page 66-15.

• Torx bolt
• ◆ 1 Nm
• Expanding nut
• Sill cladding
• ◆ Removing and installing
• Torx bolt
• ◆ 1 Nm
• Wheel housing liner
• Torx bolt
• ◆ 1 Nm
• Snap nut
• Wings
• Outer side panel