audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exterior equipment > < Installing an intact window

A3 Mk1

General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Removing and installing side window - 5-door vehicles
Installing new side window
  • ‒ Clean new window all around bonding area with cleaning fluid Part-No. D 009 401 01.
  • ‒ Prime window in bonding area with D 009 200 02.
  • ‒ Apply adhesive sealant centrally all round residual material on window.
 
A64-0142
  • ‒ → Dimensions for applying adhesive bead.
  • ‒ Dimension -a- = 12 mm.
  • ‒ Dimension -b- = 8 mm
Important

Note:

It is recommended to use adhesive sealing material D 009 100 03 (small cartridge) for bonding on a single window or D 004 300 05 (2-component adhesive) for more than one window.

Important
Windscreen must be inserted within 10 minutes, otherwise the adhesive properties of the adhesive sealant will be impaired.
  • ‒ Insert window in window opening, align all the way around, press home and fix in position with adhesive tape.
  • ‒ Setting time for DH 009 100 is 3 hours.

Exterior equipment > < Installing an intact window