audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing sun roof motor > < Adjusting seal for sun roof panel
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Servicing sun roof up to approx. 10.97 (Rockwell)
Removing and installing sliding headlining
  • ‒ Open sun roof.
 
A60-0018
  • ‒ Remove cover frame for moulded headlining

=> General Body Assembly, Interior; Repair group 70; Trims

  • ‒ Remove sun roof panel.
  • ‒ Remove sliding headlining.
  • ‒ → Unscrew front bolts -arrow- on left and right and push out springs to front over stop -1-.

 
A60-0019
  • ‒ Push sliding headlining forwards.
  • ‒ → Likewise unscrew rear bolts -arrow-, push out springs to rear and remove sliding headlining upwards.

Removing and installing sun roof motor > < Adjusting seal for sun roof panel