Audi Workshop Service and Repair Manuals

• ◆ Removing:

• ‒ → Removing glove compartment lid -1-

Notes:

The pins -2- may be bonded in if loose.

There may be a spacer installed at pin -2- between glove compartment lid and glove compartment.

• ‒ Pull out pin -2- with pliers.

• ‒ Open glove compartment lid -1-.

• ‒ → Press pin -2- from the outside with a screwdriver -3- from the outside to the inside in the direction of the arrow (there are grooves in bolt -2- for easier pressing).
• ‒ Remove glove compartment lid -1- from glove compartment.
• ‒ Removing and installing glove compartment lock => Page 68-4

• ◆ Installing:

• ‒ Bond-in loose pins with AMV 195 KD1 O1.