Audi Workshop Service and Repair Manuals

• ‒ Open glove compartment lid -1-.
• ‒ → Remove screws -2- (2x).
• ‒ Unscrew bolts -3- (4x).
• ‒ Use screwdriver to carefully lever out lid -4- in direction of arrow.
• ‒ Remove lid -4-.

• ‒ → Use screwdriver -2- to lever out glove compartment actuation -1- on left and right side in direction of arrow.
• ‒ Remove glove compartment actuation -1-.

• ‒ → Use screwdriver -3- to lever out bracket -2- from glove compartment actuation -1- on left and right side in direction of arrow.

Note:

Lock cylinder can only be removed with key inserted.

• ‒ → Carefully lever out the retaining tabs -1- (4x) in direction of arrow and at the same time press locking cylinder -2- in direction of arrow.

• ◆ Installing:

• ‒ With key entered, press in lock cylinder until all retaining tabs engage.