|
Checking seat belts
Checking child-seat restraint function for additional child seats (not for driver's seat belt)
-
‒ The complete belt assembly (including B-pillar trim) must be fitted when checking this function.
-
◆ Activation of restraint function:
-
‒ Pull out belt as far as possible.
-
◆ Function:
-
‒ The belt should retract with an audible noise.
-
‒ If the belt retraction is then stopped, it should not be possible to pull the belt out again until the function is deactivated.
-
◆ Deactivation:
-
‒ Allow the belt to retract as far as the last 100 mm (approx.).
-
‒ Restraint function must be deactivated at the latest when last 100 mm are reached. The belt then re-assumes its normal function.
|
