Audi Workshop Service and Repair Manuals

• Steering wheel
• ◆ Removing
• Plug for coil connector
• Airbag unit
• Multi-point socket head bolt 50 Nm
• ◆ Must always be replaced

•     4 -    Hexagon bolt 75 Nm
• ◆ Must always be replaced

• Torx bolts (T30)
• ◆ 7 Nm
• Torx key (T30)
• Self-cancelling ring with slip ring

• ◆ Removing

• ‒ Unbolt airbag unit using a T30 Torx key.
• ‒ Unplug connector -2-.
• ‒ Lay airbag unit down with the padded side upwards.

• ◆ Installing

• ‒ Ensure that connector -2- engages audibly.
• ‒ Bolt on the airbag unit (7 Nm).

• ‒ Switch on ignition and connect battery earthing strap.

Notes:

• ◆ After connecting the battery, please ensure that the vehicle accessories (radio, clock, electric window lifters) are checked according to workshop manual and/or operating instructions.
• ◆ If the fault warning light (K75) for airbag signals a fault after assembly the fault memory must be erased and again be interrogated by using fault reader V.A.G 1551.

=> Body Self-diagnosis; Repair group 01