-
‒ Move seat rail -2- as far back as possible and remove bolts at front between console -3- and seat rail -2-.
-
‒ Remove memory module => Page 72-169
-
‒ Detach seat rails -2-.
-
◆ Installing
-
‒ Bolt console, rails and adapter to tightening torque 23 Nm.
-
‒ Install new, microencapsulated bolts, or use Locktite.
-
‒ Position tape hook -7- for memory module -6- on door side at front between seat rail -2- and console -3- and bolt down together with seat rail and console.
|