Audi Workshop Service and Repair Manuals

• D-pillar trim

• ◆ Removing
• ‒ Remove bolt -3- (1x).
• ‒ Unscrew bolt -6-.
• ‒ Unscrew lower seat belt bolting point

Note:

Only pull on side facing rear window when disassembling D-pillar trim -1-.

• ‒ Unclip trim -1- at clamps -2- (4x).

• ◆ Installing
• ‒ Detach trim cap -3- from trim -1-.
• ‒ Attach trim -1- at clamps -2-.

Note:

When installing D-pillar trim, only press on side facing rear window - do not knock.

• ‒ Press on trim -1-.

• ‒ Screw in bolt -6-.
• ‒ Attach and insert trim cap -3-.

• Clamp
• Bolt (1x)
• ‒ Tightening torque 4 Nm
• ◆ Self-locking
• ◆ Replace
• ◆ Threaded bores for bolts must always be cleaned (e.g. with a thread tap).
• Trim cap