audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Servicing gear lever and selector housing from 09.98 > < Installation position of selector mechanism from 09.98

A3 Mk1

Removing and installing gear knob and boot from 09.98
   
Removing and installing gear knob and boot from 09.98
1 - Gear knob
q   Remove and install together with boot
q   Removing → 
2 - Boot with mounting frame
q   Remove and install together with gear knob
q   Removing → 
q   Separating from gear knob → Fig.
q   Connect to gear knob before installing → Fig.
3 - Retaining clips
4 - Connecting piece
q   Connects boot with gear knob
q   Removing → Fig.
5 - Clip
q   Secures gear knob to gear lever

   
Detaching boot from gear knob and assembling
–  Turn boot inside out.
–  Using a screwdriver, lever the prongs -arrows- on the connecting piece outwards.
–  Pull connecting piece off gear lever.
–  Turn gear knob outwards and pull free of boot.
Assembly is carried out in the reverse order to removal; note the following:
–  Turn boot inside out.
–  Insert gear knob in boot.
–  Press connecting piece onto gear knob and boot. The connecting piece must clip onto the gear knob.
  A34-0031

Servicing gear lever and selector housing from 09.98 > < Installation position of selector mechanism from 09.98