audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking gearbox oil > < Removing and installing gearbox bracket

A3 Mk1

Removing and installing pendulum support
Removing and installing pendulum support
Removing pendulum support
–  Remove centre noise insulation (below engine/gearbox) → Rep. Gr.50.
   
–  Unscrew bolts -arrows- and detach pendulum support.
Installing pendulum support
Installation is carried out in reverse sequence; note the following:
  A37-0200
–  Secure pendulum support to subframe with new bolts -arrows A- and to gearbox -arrows B-.
  N34-0712
Bolts -arrows A-20 Nm + 90° 1)2)
Bolts -arrows B-40 Nm + 90° 1)2)
l  1) Renew bolts
l  2) 90° is equivalent to a quarter turn

–  Install centre noise insulation (below engine/gearbox) → Rep. Gr.50.
   

Checking gearbox oil > < Removing and installing gearbox bracket