audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Determining dimension A: > < Set friction torque as follows:

A3 Mk1

Determining thickness of shim "S3"
Determining thickness of shim "S3"
l  Input shaft with bevel gear is removed.
l  Outer races of taper roller bearings for bevel gear with input shaft are installed.
   
–  Adjust setting ring of universal measuring tool -VW 385/1- to dimension “a” = 32 mm.
–  Set the adjustable ring to dimension “b” = 70 mm.
  N39-0259
–  Assemble universal measuring tool -VW 385/1- as illustrated.
  N39-1093
–  Place centralising disc -VW 385/3- into small tapered roller bearing outer race.
–  Insert universal measuring tool -VW 385/1- (make sure that the lugs of the adjustable ring lock into the slot -arrow- on the centralising disc).
–  Attach large cover and tighten hexagon bolts.
–  Using the adjustable ring, move the centralising disc outwards until it is no longer possible to turn universal measuring tool by hand.
  N39-1094

Determining dimension A: > < Set friction torque as follows: