audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Set friction torque as follows: > < Example:

A3 Mk1

Shims available for S4
Shims available for S4
   
Shim thickness (mm)
1.301.652.002.35
1.351.702.052.40
1.401.752.102.45
1.451.802.152.50
1.501.852.20 
1.551.902.25 
1.601.952.30 

–  Install determined shim S4 instead of shim of thickness 2.50 mm.
–  Fit pinion housing with shim S3 onto final drive housing.
  Note
Fit shim S3 (e.g. 1.2 mm) when securing pinion housing to prevent the shaft bevel gear from making contact with the final drive housing.
   
–  Lock bevel box output flange with support plate -T10108/1-.
–  Install hexagon nut for output flange and tighten to specified torque → Item.
Socket -A- for 3/4" drive
l  Input shaft with bevel gear is removed
  N39-1077
–  Measure friction torque.
-A-Torque gauge, commercially available, 0 ...600 Ncm
-B- Socket attachment
-C- Adapter between 1/2 " and 3/4 "
  N39-1092

Set friction torque as follows: > < Example: