audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Gear lever and selector housing - exploded view of components > < Installation position of selector mechanism

A3 Mk1

Gear lever knob and boot - exploded view of components
   
Gear lever knob and boot - exploded view of components
1 - Gear lever knob
q   Remove and install together with boot
q   Removing
2 - Boot with mounting frame
q   Remove and install together with gear lever knob
q   Removing
q   Separating from gear lever knob → Fig.
q   Connect to gear lever knob before installing → Fig.
3 - Retaining clips
4 - Clamping sleeve
q   Connects boot with gear lever knob
q   Removing → Fig.
5 - Clip
q   Secures gear lever knob to gear lever
q   Secure on gear lever knob using hose clip pliers -V.A.G 1275-

   
Detaching boot from gear lever knob and assembling
–  Turn boot inside out.
–  Carefully bend tabs on clamping sleeve open -arrows- using screwdriver. Detach clamping sleeve from gear lever knob while doing so.
–  Detach gear lever knob from boot.
Assembly is carried out in reverse sequence; note the following:
–  Insert gear lever knob in boot.
–  Push clamping sleeve onto gear lever knob and engage.
–  Install gear lever knob and boot together.
  A34-0031

Gear lever and selector housing - exploded view of components > < Installation position of selector mechanism