audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling input shaft, output shafts (pinion shafts), differential and selector rods > < Assembly overview

A3 Mk1

6-Speed manual gearbox 02M, Front-wheel drive
Dismantling and assembling gearbox
Removing and installing gearbox housing and selector mechanism
 
N34-0990
  • Countersunk head bolt, 25 Nm
  • Flange shaft with spring
    • ◆ Removing and installing
    • ◆ Assembling=> from Page 39-7
  • Reversing light switch, 20 Nm
  • Oil seal
    • ◆ Always renew
  • Oil drain plug, 30 Nm
    • ◆ Always renew
  • Oil seal
    • ◆ Always renew
  • Cover plate
 
N34-0990
  • Hexagon bolt, 20 Nm
    • ◆ Always renew
  • Hexagon bolt, 20 Nm
    • ◆ For selector shaft -item 14- to cover plate
    • ◆ Always renew
  • O-ring
    • ◆ Always renew
    • ◆ Insert in groove in cover plate
  • Locking bolt, 15 Nm
    • ◆ For selector shaft gate
    • ◆ Always renew
    • ◆ Insert with locking fluid D 000 600 A2
  • Hexagon bolt, 25 Nm and turn 45°further
    • ◆ With attached washer
    • ◆ Always renew
  • Hexagon bolt, 25 Nm and turn 45°further
    • ◆ Without washer
    • ◆ Always renew
 
N34-0990
  • Selector shaft
    • ◆ Dismantling and assembling => Page 34-94, Dismantling and assembling gearbox selector mechanism
  • Hexagon bolt, 20 Nm
    • ◆ Always renew
  • Selector mechanism cover
    • ◆ Dismantling and assembling => Page 34-94, Dismantling and assembling gearbox selector mechanism
  • Clutch housing
    • ◆ Servicing => Page 34-85
  • Gearbox housing
    • ◆ Servicing => Page 34-73

Dismantling and assembling input shaft, output shafts (pinion shafts), differential and selector rods > < Assembly overview