| Rules for cleanliness when working on the automatic gearbox |
| t
| Thoroughly clean all joints and connections and the surrounding areas before dismantling. |
| t
| Use cleaning fluid -D 009 401 04- to clean the gearbox and its components. |
| t
| Use lint-free cloths for cleaning; Audi recommends the “WYPALL X70 / WORKHORSE” cloth from Kimberly-Clark Professional. |
| t
| Seal off open lines and connections with clean plugs or sealing caps immediately. |
| t
| Place removed parts on a clean surface and cover them over. Use sheeting and paper. Use lint-free cloths. |
| t
| Carefully cover or seal open components if repairs cannot be completed immediately. |
| t
| Only install clean components: do not remove replacement parts from packaging until just before installation. |
| t
| Protect unplugged electrical connectors against dirt and moisture and make sure connections are dry when attaching. |
|
|
|
