A3 Mk1
Exploded view of „K3“ plates |
The clutch should be dismantled only for cleaning. There is no provision for repairs. |
1 - | „K2/K3“ clutch housing |
q | Only the parts of the „K3“ are shown here |
q | The plates of „K2“ are already removed |
q | Dismantling and assembling clutch housing → Chapter |
2 - | Outer plate |
3 - | Inner plate |
4 - | Last outer plate (= pressure plate) |
q | This plate is thicker than the other outer plates |
q | The »smooth« side faces the plates |
5 - | Circlip |
q | The circlip is not renewed, so take care when removing and installing and do not over-stretch |